EMC module, LED + free-wheeling diode
LED indicator + free-wheeling diode, standard polarity – ATEX-compliant (Ex ec)*The module with LED and free-wheeling diode is for DC use only.The negative turn-off voltage spike of the relay coil is suppressed by the free-wheeling diodeshort-circuited. The relay’s fall time is extended by a factor of 3 to 5.If this extension of the turn-off time is not desired, a varistor orselect an RC module. With reverse polarity protection diode. Module, free-wheeling diode, and green LED, 6 to 24 V DC, with reverse polarity protection diode 99.02.9.024.99
Available immediately
EMC module, LED + varistor
LED indicator + varistor - ATEX-compliant (Ex ec)*The module with LED and varistor is intended for use with both AC and DC.The peak cut-off voltage of the relay coil is limited by the varistor to approx.2.5 times the module’s rated voltage. For DC operating voltage, note thatNote that the + (positive) terminal of the operating voltage must be connected to terminal A1. The relay’s fall time is extended only slightly. (Note DC polarity!). Module, varistor, and green LED, 6 to 24 V AC/DC 99.02.0.024.98
Available immediately
EMC module, LED + varistor
LED indicator + varistor - ATEX-compliant (Ex ec)*The module with LED and varistor is intended for use with both AC and DC.The peak cut-off voltage of the relay coil is limited by the varistor to approx.2.5 times the module’s rated voltage. For DC operating voltage, note thatNote that the + (positive) terminal of the operating voltage must be connected to terminal A1. The relay’s fall time is extended only slightly. (Note DC polarity!). Module, varistor, and green LED, 110 to 240 V AC/DC 99.02.0.230.98
Available immediately
Miniature Industrial PCB Relay
Test button + mechanical indicator Miniature industrial relaysPluggable into socketsType 55.34- 4 changeover contacts, 7 A• Coils for AC or DC• Lockable test button and mechanicalIndicator, standard on 2- and 4-changeover relays• With integrated LED and free-wheeling diode(Optional)• Series 94 sockets for printed circuit boards or for35 mm mounting rail (EN 60715) with screw-,Tension-spring or push-in terminals• Series 99 LED display and EMC suppression modulesand 86.30 time modules available as accessories• Optional adapters available as accessories• Cadmium-free contact material• European patent: Relay with plug-in terminals, 4 changeover contacts, 7 A, coil 24 V AC 55.34.8.024.0040
Available immediately
Relays Series 55, coil: 24 V AC, 3UK, 10 A / 250 V AC
Test button + LED + diode Miniature industrial relaysPluggable into socketsType 55.33- 3 changeover contacts, 10 A• Coils for AC or DC• Lockable test button and mechanicalDisplay, standard on 2- and 4-changeover relays• With integrated LED and free-wheeling diode(Optional)• Series 94 sockets for printed circuit boards or for35 mm mounting rail (EN 60715) with screw-,Tension-spring or push-in terminals• Series 99 LED display and EMC suppression modulesand 86.30 time modules available as accessories• Optional adapters available as accessories• Cadmium-free contact material• European Patent Test Button + LED Indicator 55.33.8.024.0050
Available immediately
Miniature Industrial PCB Relay
Test button + mechanical indicator Miniature industrial relaysPluggable into socketsType 55.34- 4 changeover contacts, 7 A• Coils for AC or DC• Lockable test button and mechanicalDisplay, standard on 2- and 4-changeover relays• With integrated LED and free-wheeling diode(Optional)• Series 94 sockets for printed circuit boards or for35 mm mounting rail (EN 60715) with screw-,Tension-spring or push-in terminals• Series 99 LED display and EMC suppression modulesand 86.30 time modules available as accessories• Optional adapters available as accessories• Cadmium-free contact material• European patent: Relay with plug-in terminals, 4 changeover contacts, 7 A, coil 24 V DC 55.34.9.024.0040
Available immediately
Industrial Plug-In Relay
Test button, mechanical indicator Industrial plug-in relays, 2- or 3-pole Type 60.13- 3 changeover contacts, 10 A• Coils for AC or DC• Lockable test button and mechanicalDisplay• With integrated LED and free-wheeling diode(Optional)• Cadmium-free contact material• Series 90 sockets for 35 mm mounting rail(EN 60715) with cage clamps or withSolder or PCB terminals• Series 99 LED display and EMC suppression moduleand 86.00/86.30 time modules as accessoriesavailable• European patent: Relay with plug-in terminals, 3 changeover contacts, 10 A, coil 24 V AC 60.13.8.024.0040
Available immediately
Industrial Plug-In Relay
Test button, mechanical indicator Industrial plug-in relays, 2- or 3-pole Type 60.13- 3 changeover contacts, 10 A• Coils for AC or DC• Lockable test button and mechanicalDisplay• With integrated LED and free-wheeling diode(Optional)• Cadmium-free contact material• Series 90 sockets for 35 mm mounting rail(EN 60715) with cage clamps or withSolder or PCB terminals• Series 99 LED display and EMC suppression moduleand 86.00/86.30 time modules as accessoriesavailable• European patent: Relay with plug-in terminals, 3 changeover contacts, 10 A, coil 48 V AC 60.13.8.048.0040
Available immediately
Plug-in/PCB Relay
1- and 2-pole power relays directly for the circuit board or for sockets Type 40.52- 2 changeover contacts, 8 A (5.0 mm pitch)• Pin length of 3.5 mm for printed circuit board• Pin length of 5.2 mm for plug-in relays• AC or DC coils (650 mW or 500 mW)• 6 kV (1.2/50 μs), 8 mm clearance and creepage distancesbetween coil and contact• Complies with EN 60335-1, requirements for un-supervised household appliances (glow-wire test)• Series 95 sockets for printed circuit boards or for35 mm mounting rail (EN 60715) with screw-,tension-spring or push-in terminals• Series 99 LED display and EMC suppression modulesand 86.30 time modules available as accessories• Relay protection class:RT II - flux-tight (standard)RT III - wash-tight (optional) Relay with plug-in and PCB terminals, 2 changeover contacts rated for 8 A, coil 24 V DC 40.52.9.024.0000
Available immediately
Miniature Plug-In Relay
Test button + mech. indicator Industrial miniature relay, 1 or 2 changeover contacts For mounting in sockets or directconnection via Faston terminalsType 46.61- 1 changeover contact 16 A• Coils for AC or DC sensitive, 500 mW• Available with: Lockable test button,LED and mechanical indicator• 6 kV (1.2/50 μs), 8 mm clearance and creepage distance• Cadmium-free contact material• Series 97 sockets for printed circuit board or for35 mm mounting rail (EN 60715) with screw-or push-in terminals• Series 99 LED indicator and EMC suppression modulesand 86.30 time modules available as accessories• Optional adapter available as accessory• European patent Industrial miniature relay, 1 changeover contact 16 A, coil 230 V AC 46.61.8.230.0040
Available immediately
Miniature Plug-In Relay
Test button + mechanical indicator Industrial miniature relay, 1 or 2 changeover contacts For mounting in sockets or directconnection via Faston terminalsType 46.52- 2 changeover contacts 8 A• Coils for AC or DC sensitive, 500 mW• Available with: Lockable test button,LED and mechanical indicator• 6 kV (1.2/50 μs), 8 mm clearance and creepage distance• Cadmium-free contact material• Series 97 sockets for printed circuit board or for35 mm mounting rail (EN 60715) with screw-or Push-In terminals• Series 99 LED indication and EMC suppression modulesand 86.30 timing modules available as accessories• Optional adapter available as accessory• European Patent Industrial miniature relay, 2 changeover contacts 8 A, coil 230 V AC 46.52.8.230.0040
Available immediately
Miniature Plug-In Relay
Test button + mech. indicator Industrial miniature relay, 1 or 2 changeover contacts For mounting in sockets or directConnection via Faston terminalsType 46.52- 2 changeover contacts 8 A• Coils for AC or DC sensitive, 500 mW• Available with: Lockable test button,LED and mechanical indicator• 6 kV (1.2/50 μs), 8 mm clearance and creepage distance• Cadmium-free contact material• Series 97 sockets for printed circuit board or for35 mm mounting rail (EN 60715) with screw-or Push-In terminals• Series 99 LED indicator and EMC suppression modulesand 86.30 time modules available as accessories• Optional adapter available as accessory• European Patent Industrial miniature relay, 2 changeover contacts 8 A, coil 24 V AC 46.52.8.024.0040
Available immediately
Miniature Plug-In Relay
Test button + mech. indicator Industrial miniature relay, 1 or 2 changeover contacts For mounting in sockets or directConnection via Faston terminalsType 46.52- 2 changeover contacts, 8 A• Coils for AC or DC sensitive, 500 mW• Available with: Lockable test button,LED and mechanical indicator• 6 kV (1.2/50 μs), 8 mm clearance and creepage distance• Cadmium-free contact material• Series 97 sockets for printed circuit board or for35 mm mounting rail (EN 60715) with screw-or push-in terminals• Series 99 LED indicator and EMC suppression modulesand 86.30 time modules available as accessories• Optional adapter available as accessory• European patent Industrial miniature relay, 2 changeover contacts 8 A, coil 24 V DC 46.52.9.024.0040
Available immediately
Industrial Plug-In Relay
Test button, mech. indicator Industrial plug-in relay, 2- or 3-pole Type 60.13- 3 changeover contacts, 10 A• Coils for AC or DC• Lockable test button and mechanicalindicator• With integrated LED and free-wheeling diode(Optional)• Cadmium-free contact material• Series 90 sockets for 35 mm mounting rail(EN 60715) with cage clamps or withsolder or PCB terminals• Series 99 LED indicator and EMC suppression moduleand time modules 86.00/86.30 available as accessories• European patent Relay with plug-in terminals, 3 changeover contacts 10 A, coil 230 V AC 60.13.8.230.0040
Available immediately
Plug-in/PCB Relay
1- and 2-pole power relays, directly for for the circuit board or for sockets Type 40.31/51- 1 changeover contact, 12 A (3.5 mm pitch)- 1 changeover contact, 12 A (5.0 mm pitch)• Pin length of 3.5 mm for printed circuit board• Pin length of 5.2 mm for plug-in relays• AC or DC coils (650 mW or 500 mW)• 6 kV (1.2/50 μs), 8 mm clearance and creepage distancesbetween coil and contact• Complies with EN 60335-1, requirements for un-Supervised household appliances (glow-wire test)• Series 95 sockets for printed circuit boards or for35 mm mounting rail (EN 60715) with screw-,Tension-spring or push-in terminals• Series 99 LED display and EMC suppression modulesand 86.30 time modules available as accessories• Relay protection class:RT II – flux-tight (standard)RT III – wash-tight (optional) Relay with plug-in and PCB terminals, 1 changeover contact 12 A, coil 230 V AC 40.31.8.230.0000
Available immediately
Plug-in/PCB Relay
1- and 2-pole power relays, directly for for the circuit board or for sockets Type 40.31/51- 1 changeover contact, 12 A (3.5 mm pitch)- 1 changeover contact, 12 A (5.0 mm pitch)• Pin length of 3.5 mm for printed circuit board• Pin length of 5.2 mm for plug-in relays• AC or DC coils (650 mW or 500 mW)• 6 kV (1.2/50 μs), 8 mm clearance and creepage distancesbetween coil and contact• Complies with EN 60335-1, requirements for un-Supervised household appliances (glow-wire test)• Series 95 sockets for printed circuit boards or for35 mm mounting rail (EN 60715) with screw-,Tension-spring or push-in terminals• Series 99 LED display and EMC suppression modulesand 86.30 time modules available as accessories• Relay protection class:RT II – flux-tight (standard)RT III – wash-tight (optional) Relay with plug-in and PCB terminals, 1 changeover contact 12 A, coil 24 V DC 40.31.9.024.0000
Available immediately
Relays Series 40, coil: 24 V DC, 1 W, 16 A / 250 V AC
1- and 2-pole power relays directly for the circuit board or for sockets Type 40.61- 1 changeover contact, 16 A (5.0 mm pitch)• Pin length of 3.5 mm for printed circuit board• Pin length of 5.2 mm for plug-in relays• AC or DC coils (650 mW or 500 mW)• 6 kV (1.2/50 μs), 8 mm clearance and creepage distancesbetween coil and contact• Complies with EN 60335-1, requirements for un-Supervised household appliances (glow-wire test)• Series 95 sockets for printed circuit boards or for35 mm mounting rail (EN 60715) with screw-,Tension-spring or push-in terminals• Series 99 LED display and EMC suppression modulesand 86.30 time modules available as accessories• Relay protection class:RT II – flux-tight (standard)RT III – washproof (optional) Series 40 Power Relays, PCB Relays, Bistable Relay 40.61.9.024.0000
Available immediately
Plug-in/PCB Relay
1- and 2-pole power relays directly for the circuit board or for sockets Type 40.52- 2 changeover contacts, 8 A (5.0 mm pitch)• Pin length of 3.5 mm for printed circuit board• Pin length of 5.2 mm for plug-in relays• AC or DC coils (650 mW or 500 mW)• 6 kV (1.2/50 μs), 8 mm clearance and creepage distancesbetween coil and contact• Complies with EN 60335-1, requirements for un-supervised household appliances (glow-wire test)• Series 95 sockets for printed circuit boards or for35 mm mounting rail (EN 60715) with screw-,tension-spring or push-in terminals• Series 99 LED display and EMC suppression modulesand 86.30 time modules available as accessories• Relay protection class:RT II - flux-tight (standard)RT III - wash-tight (optional) Relay with plug-in and PCB terminals, 2 changeover contacts rated for 8 A, coil 230 V AC 40.52.8.230.0000
Available immediately
Miniature Plug-In Relay
Test button + mechanical indicator Industrial miniature relay, 1 or 2 changeover contacts For mounting in sockets or directConnection via Faston terminalsType 46.61- 1 changeover contact, 16 A• Coils for AC or DC, 500 mW• Available with: Lockable test button,LED and mechanical indicators• 6 kV (1.2/50 μs), 8 mm clearance and creepage distances• Cadmium-free contact material• Series 97 sockets for printed circuit boards or for35 mm mounting rail (EN 60715) with screw-or push-in terminals• Series 99 LED display and EMC suppression modulesand 86.30 time modules available as accessories• Optional adapters available as accessories• European patent Industrial miniature relay, 1 changeover contact, 16 A, 24 V AC coil 46.61.8.024.0040
Available immediately
Relays Series 40, coil: 24 V AC, 1 W, 16 A / 250 V AC
1- and 2-pole power relays, directly for for the circuit board or for sockets Type 40.61- 1 changeover contact, 16 A (5.0 mm pitch)• Pin length of 3.5 mm for printed circuit board• Pin length of 5.2 mm for plug-in relays• AC or DC coils (650 mW or 500 mW)• 6 kV (1.2/50 μs), 8 mm clearance and creepage distancesbetween coil and contact• Complies with EN 60335-1, requirements for un-Supervised household appliances (glow-wire test)• Series 95 sockets for printed circuit boards or for35 mm mounting rail (EN 60715) with screw-,Tension-spring or push-in terminals• Series 99 LED display and EMC suppression modulesand 86.30 time modules available as accessories• Relay protection class:RT II – flux-tight (standard)RT III - wash-tight (optional) Series 40 power relays, PCB relays, bistable relay 40.61.8.024.0000
Available immediately
Industrial Plug-In Relay
Test button, mechanical indicator Industrial plug-in relays, 2- or 3-pole Type 60.13- 3 changeover contacts, 10 A• Coils for AC or DC• Lockable test button and mechanicalDisplay• With integrated LED and free-wheeling diode(Optional)• Cadmium-free contact material• Series 90 sockets for 35 mm mounting rail(EN 60715) with cage clamps or withSolder or PCB terminals• Series 99 LED display and EMC suppression moduleand 86.00/86.30 time modules as accessoriesavailable• European patent: Relay with plug-in terminals, 3 changeover contacts, 10 A, coil 12 V DC 60.13.9.012.0040
Available immediately
Industrial Plug-In Relay
Test button, mech. indicator Industrial plug-in relays, 2- or 3-pole Type 60.13- 3 changeover contacts, 10 A• Coils for AC or DC• Lockable test button and mechanicalindicator• With integrated LED and free-wheeling diode(Optional)• Cadmium-free contact material• Series 90 sockets for 35 mm mounting rail(EN 60715) with cage clamps or withsolder or PCB terminals• Series 99 LED indicator and EMC suppression moduleand 86.00/86.30 time modules available as accessories• European patent Relay with plug-in terminals, 3 changeover contacts 10 A, coil 24 V DC 60.13.9.024.0040
Available immediately
Miniature Plug-In Relay
Test button + mechanical indicator, LED indicator Industrial miniature relay, 1 or 2 changeover contacts For mounting in sockets or directConnection via Faston terminalsType 46.52- 2 changeover contacts, 8 A• Coils for AC or DC, 500 mW• Available with: Lockable test button,LED and mechanical indicators• 6 kV (1.2/50 μs), 8 mm clearance and creepage distances• Cadmium-free contact material• Series 97 sockets for printed circuit boards or for35 mm mounting rail (EN 60715) with screw-or push-in terminals• Series 99 LED display and EMC suppression modulesand 86.30 time modules available as accessories• Optional adapters available as accessories• European patent Industrial miniature relay, LED indicator, 2 changeover contacts, 8 A, 24 V AC coil 46.52.8.024.0054
Available immediately
Miniature Plug-In Relay
Test button + mechanical indicator, LED indicator Industrial miniature relay, 1 or 2 changeover contacts For mounting in sockets or directConnection via Faston terminalsType 46.61- 1 changeover contact 16 A• Coils for AC or DC sensitive, 500 mW• Available with: Lockable test button,LED and mechanical indicator• 6 kV (1.2/50 μs), 8 mm clearance and creepage distances• Cadmium-free contact material• Series 97 sockets for printed circuit board or formounting rail 35 mm (EN 60715) with screw-or push-in terminals• Series 99 LED indicator and EMC suppression modulesand 86.30 time modules available as accessories• Optional adapter available as accessories• European patent Industrial miniature relay, polarity-neutral LED indicator, 1 changeover contact 16 A, coil 46.61.9.024.0074
Available immediately
Do you have specific requirements?
We’ll provide you with personalized advice and work with you to find the right solution for your application.