MNX Accessories – Fibox Industrial Enclosures

Filter products

> 10 available

Two galvanized U-channels on a light-colored background. The one in the foreground lies flat and has two rectangular cutouts at each end on the top. The second one is positioned diagonally behind it, with its side visible. Can be used as guide rails.

TS 35 mounting rail for enclosures 35x100

TS 35 mounting rail, for enclosures 130x80x35–180x130x175. DIN-35 mounting rail (electrogalvanized steel, 7.5 mm high). 5514082

Item Number: MIV-10

Available immediately

Price after login

Light gray plastic enclosure with a transparent, smoky gray lid, secured by four black screws. Several mounting points are visible inside. "FIBOX" and "MADE IN FINLAND" are visible.

MNX PC Enclosure, HxWxD 130x80x100, flat base

FIBOX MNX enclosures made of polycarbonate and ABS are manufactured using high-quality injection molding technology. They are designed for the installation and protection of electrical and electronic components in the most demanding environments. The MNX series comprises more than 260 different enclosure variants.Dimensions range from 100x100x35 mm to 255x180x175 mm. Transparent lid 6012904

Item Number: PC-100/100-LT

Delivery time on requestk

Price after login

> 10 available

Rectangular, gray housing with a transparent, dark-tinted front cover, secured at the corners with four black screws. Several small mounting points are visible inside. It stands on a white background, viewed slightly from the front at an angle.

MNX polycarbonate enclosure, transparent lid

FIBOX MNX enclosures made of polycarbonate and ABS are manufactured using high-quality injection molding technology. They are designed for the installation and protection of electrical and electronic components in the most demanding environments. The MNX series comprises more than 260 different enclosure variants.Dimensions range from 100x100x35 mm to 255x180x175 mm. Transparent lid 6011927

Item Number: PC-200/100-HT

Available immediately

Price after login

Rectangular, light gray plastic housing, presumably an electrical junction box, isolated on a white background. At the top is a slightly lighter-colored, flat cover, secured at the corners with four Phillips-head screws. The surface is smooth and matte.

MNX polycarbonate enclosure, gray lid

FIBOX MNX enclosures made of polycarbonate and ABS are manufactured using high-quality injection molding technology. They are designed for the installation and protection of electrical and electronic components in the most demanding environments. The MNX series comprises more than 260 different enclosure variants.Dimensions range from 100x100x35 mm to 255x180x175 mm. Gray lid 6011323

Item Number: PC-175/150-HG

Available immediately

Price after login

Various metal components, such as screws, nuts, washers, and cylindrical springs, are neatly arranged on a flat, rectangular metal plate. The shiny parts reflect light slightly.

MNX Aluminum Front Panel 170x162x1.5

Front panel, for enclosure180x180x60–180x180x150.Front panel (aluminum, 1.5 mm thick). 6314573

Item Number: FP-A-175/180

Delivery time on requestk

Price after login

MNX polycarbonate enclosure, transparent lid

FIBOX MNX enclosures made of polycarbonate and ABS are manufactured using high-quality injection molding technology. They are designed for the installation and protection of electrical and electronic components in the most demanding environments. The MNX series comprises more than 260 different enclosure variants.Dimensions range from 100x100x35 mm to 255x180x175 mm. Transparent lid 6011924

Item Number: PC-200/63-HT

Available immediately

Price after login

A vertical, rectangular, light gray plastic case on a white background. The case is slightly visible from the front and the right side, with a smooth surface. Four silver screws secure the lid at the corners.

MNX polycarbonate enclosure, gray lid

FIBOX MNX enclosures made of polycarbonate and ABS are manufactured using high-quality injection molding technology. They are designed for the installation and protection of electrical and electronic components in the most demanding environments. The MNX series comprises more than 260 different enclosure variants.Dimensions range from 100x100x35 mm to 255x180x175 mm. Gray lid 6011329

Item Number: PC-200/150-HG

Delivery time on requestk

Price after login

> 10 available

Two silver-gray metal plates, one atop the other, on a white background. The larger, curved plate has a rounded upper right corner and rectangular cutouts along the edges. The smaller, rectangular plate sits on top, also featuring cutouts.

MNX Mounting Plate, Sheet Steel 148x98x1.5

Mounting plate, for enclosures 180x130x35–255x180x175. Mounting plate (electrogalvanized steel, 1.5 mm thick). 5514078

Item Number: MIV-150

Available immediately

Price after login

> 10 available

Light gray, rectangular plastic enclosure for electronics with a smooth, matte finish. The lid is secured at the corners with four visible screws, indicating protection against dust and water. On a white background.

MNX polycarbonate enclosure, gray lid

FIBOX MNX enclosures made of polycarbonate and ABS are manufactured using high-quality injection molding technology. They are designed for the installation and protection of electrical and electronic components in the most demanding environments. The MNX series comprises more than 260 different enclosure variants.Dimensions range from 100x100x35 mm to 255x180x175 mm. Gray lid 6012310

Item Number: PC-125/100-LG

Available immediately

Price after login

> 10 available

Close-up of black wing-head screws for the cover of an MNX enclosure. One wing-head screw is secured in the transparent cover; two others are loosely placed on the enclosure with white fasteners for securing the cover.

MNX Wing Nuts for Cover Screws Gray

Wing nuts for cover screws, gray, for MNX enclosures. 6314552

Item Number: MB-14552

Available immediately

Price after login

> 10 available

Rectangular, light gray plastic enclosure, presumably an electrical junction box, isolated on a white background. At the top is a slightly lighter-colored, flat cover, secured at the corners with four Phillips-head screws. The surface is smooth and matte.

MNX polycarbonate enclosure, gray lid

FIBOX MNX enclosures made of polycarbonate and ABS are manufactured using high-quality injection molding technology. They are designed for the installation and protection of electrical and electronic components in the most demanding environments. The MNX series comprises more than 260 different enclosure variants.Dimensions range from 100x100x35 mm to 255x180x175 mm. Gray lid 6011321

Item Number: PC-175/100-HG

Available immediately

Price after login

White, rectangular plastic electrical enclosure, shown at a slight angle. Smooth, matte surface to protect electrical components. Front cover secured at all four corners with recessed screws.

MNX polycarbonate enclosure, gray lid

FIBOX MNX enclosures made of polycarbonate and ABS are manufactured using high-quality injection molding technology. They are designed for the installation and protection of electrical and electronic components in the most demanding environments. The MNX series comprises more than 260 different enclosure variants.Dimensions range from 100x100x35 mm to 255x180x175 mm. Gray lid 6017338

Item Number: PC-300/150-ZG

Available immediately

Price after login

> 10 available

Square, light gray ABS enclosure with smooth sides and a flat lid, also gray. The lid is secured at the four corners with silver screws. The enclosure is sturdy and is designed to protect electronic components.

MNX ABS enclosure, gray lid

130x130x75 6081308

Item Number: ABS-125/75-HG

Available immediately

Price after login

Only 1 available

Compact, light gray MNX PC enclosure, shown at an angle from the front and top. Gray cover with two round metric pre-marked holes on top. Polyamide cover screws at the four corners securely fasten the top and bottom sections together.

MNX PC enclosure with metric pre-punched holes, gray lid

Consists of : Base with TPE gasket, screws for the mounting plate/DIN rail and cover with polyamide cover screws. gray cover, 130x130x125 6016310

Item Number: PCM-125/125-G

Available immediately

Price after login

> 10 available

Light gray, rectangular electrical junction box with a smooth, recessed front panel. Four silver Phillips-head screws secure the cover at the corners. Sides are slightly textured; the cover and front panel are smooth. Slightly angled.

MNX polycarbonate enclosure, gray lid

FIBOX MNX enclosures made of polycarbonate and ABS are manufactured using high-quality injection molding technology. They are designed for the installation and protection of electrical and electronic components in the most demanding environments. The MNX series comprises more than 260 different enclosure variants.Dimensions range from 100x100x35 mm to 255x180x175 mm. Gray lid 6013330

Item Number: PC-200/88-XHG

Available immediately

Price after login

MNX polycarbonate enclosure, transparent lid

FIBOX MNX enclosures made of polycarbonate and ABS are manufactured using high-quality injection molding technology. They are designed for the installation and protection of electrical and electronic components in the most demanding environments. The MNX series comprises more than 260 different enclosure variants.Dimensions range from 100x100x35 mm to 255x180x175 mm. Transparent lid 6017938

Item Number: PC-300/150-ZT

Available immediately

Price after login

Only 1 available

Empty, rectangular electrical enclosure made of light-colored plastic with a dark gray, transparent lid, secured at the four corners with black screws. Inside, small mounting points for installing electronic components are visible.

MNX polycarbonate enclosure, transparent lid

FIBOX MNX enclosures made of polycarbonate and ABS are manufactured using high-quality injection molding technology. They are designed for the installation and protection of electrical and electronic components in the most demanding environments. The MNX series comprises more than 260 different enclosure variants.Dimensions range from 100x100x35 mm to 255x180x175 mm. Transparent lid 6011910

Item Number: PC-125/125-HT

Available immediately

Price after login

Only 1 available

Rectangular, light gray ABS enclosure with a smooth surface, shown at a slight angle from the front. Gray cover with visible screws at the upper corners. Sturdy enclosure for protecting electronic components or installations.

MNX ABS Enclosure 255x180x100, gray lid

- 6083326

Item Number: ABS-200/100-XHG

Available immediately

Price after login

A light gray, rectangular plastic enclosure, standing upright and slightly angled, showing the front and side. Four screws secure the front panel at the top and bottom. Smooth, matte finish; sturdy; ideal for protecting electronic components.

MNX polycarbonate enclosure, gray lid

FIBOX MNX enclosures made of polycarbonate and ABS are manufactured using high-quality injection molding technology. They are designed for the installation and protection of electrical and electronic components in the most demanding environments. The MNX series comprises more than 260 different enclosure variants.Dimensions range from 100x100x35 mm to 255x180x175 mm. Gray lid 6011303

Item Number: PC-100/100-HG

Available immediately

Price after login

Light gray, rectangular plastic enclosure with a smooth, matte finish. The front features four visible corner screws that hold a removable cover in place. Protection for electrical or electronic components against a white background.

MNX polycarbonate enclosure, gray lid

FIBOX MNX enclosures made of polycarbonate and ABS are manufactured using high-quality injection molding technology. They are designed for the installation and protection of electrical and electronic components in the most demanding environments. The MNX series comprises more than 260 different enclosure variants.Dimensions range from 100x100x35 mm to 255x180x175 mm. Gray lid 6011332

Item Number: PC-95/75-HG

Available immediately

Price after login

> 10 available

A gray, rectangular electronics enclosure with a transparent dark gray cover, secured at the corners with four black screws. Four mounting points are visible inside. Slightly angled against a white background.

MNX PC Enclosure, HxWxD 130x130x75, deep base

FIBOX MNX enclosures made of polycarbonate and ABS are manufactured using high-quality injection molding technology. They are designed for the installation and protection of electrical and electronic components in the most demanding environments. The MNX series comprises more than 260 different enclosure variants.Dimensions range from 100x100x35 mm to 255x180x175 mm. Transparent lid 6012909

Item Number: PC-125/75-LT

Available immediately

Price after login

Empty rectangular enclosure with a slightly tinted, transparent dark gray cover. Cylindrical mounting points are visible on the light gray base. The cover is secured with four black corner screws.

MNX polycarbonate enclosure, transparent lid

FIBOX MNX enclosures made of polycarbonate and ABS are manufactured using high-quality injection molding technology. They are designed for the installation and protection of electrical and electronic components in the most demanding environments. The MNX series comprises more than 260 different enclosure variants.Dimensions range from 100x100x35 mm to 255x180x175 mm. Transparent lid 6011917

Item Number: PC-150/150-HT

Delivery time on requestk

Price after login

> 10 available

MNX polycarbonate enclosure, gray lid

FIBOX MNX enclosures made of polycarbonate and ABS are manufactured using high-quality injection molding technology. They are designed for the installation and protection of electrical and electronic components in the most demanding environments. The MNX series comprises more than 260 different enclosure variants.Dimensions range from 100x100x35 mm to 255x180x175 mm. Gray lid 6012332

Item Number: PC-95/50-LG

Available immediately

Price after login

Rectangular, light gray plastic housing with a dark, transparent front cover. Black mounting screws are visible at the four corners. Inside, there are several cylindrical mounting points for installing components.

MNX PC Enclosure, HxWxD 180x130x125, extra-tall base

FIBOX MNX enclosures made of polycarbonate and ABS are manufactured using high-quality injection molding technology. They are designed for the installation and protection of electrical and electronic components in the most demanding environments. The MNX series comprises more than 260 different enclosure variants.Dimensions range from 100x100x35 mm to 255x180x175 mm. Transparent lid 6013935

Item Number: PC-150/125-XHT

Delivery time on requestk

Price after login

Do you have specific requirements?

We’ll provide you with personalized advice and work with you to find the right solution for your application.

Submit Inquiry